Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: A7 woofer

  1. #1
    Hostboard Member Davidg's Avatar
    Join Date
    March 20th, 2007
    Posts
    76
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Hi, another new guy here! lol Actually I've been lurking for awhile, So what woofer do you guys like best in 828,A7 cab. 515B or 515-8G ? I have both and cab. has been drilled to accept either.

  2. #2
    Senior Hostboard Member LICORNE's Avatar
    Join Date
    April 23rd, 2004
    Posts
    1,603
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    3 Post(s)

    Post

    It depends what and were your using it for.

    When loaded with a 416 and small 511 format horn
    it's excellent but has limitations for auditoriums.

    Loaded with 515B 75 watt( RMS or AES ?)
    and large format horn 1005 it definetly has more punch. But then it's not an A-7 but an A-5

    Loaded with 515 G as in 8GHP 200 watt AES or 400 watts rms and 1005 Horn or 94 Mantaray horn
    You got something both in the High Fi range and
    capable of LIVE sound reproduction with that
    full clear sound and lot's of punch.

    23


    .....................................

  3. #3
    Senior Hostboard Member LICORNE's Avatar
    Join Date
    April 23rd, 2004
    Posts
    1,603
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    3 Post(s)

    Post

    Your 515B would be 75 watt Continuous or RMS.
    Your 515G would be 75 watt AES or 150 watt RMS.

    .........................................

  4. #4
    Senior Hostboard Member LICORNE's Avatar
    Join Date
    April 23rd, 2004
    Posts
    1,603
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    3 Post(s)

    Post

    Hi

    The best one for the A-7 cabinet is the 515-8G
    It was redesigned for that purpose :horn loaded cabinet like the original 515-8C.

    I have to rectify my power rated comment.
    There all in AES on that chart above. Meaning
    that a 515-8B 75Watt AES is 150 watt RMS same as
    515-8G. But the 8G sounds better in a front loaded horn enclosure.

    .............................................

  5. #5
    Hostboard Member Davidg's Avatar
    Join Date
    March 20th, 2007
    Posts
    76
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Hey thanks for the reply,These 828 cabs have been rebuilt with extra bracing and foam in horn flairs they have an extra 1/2 inch layer on them making them a full inch and an eighth thick! they are very heavy, they will see some HiFi/Theater use and possibly some live sound FOH use. The only horns I have at the moment are a pair of very old cast 811's (not welded but sand cast) these have been coated with a bedliner type of coating and the vanes cut and glued on one end only. They are very dead absolutely no ringing at all, they currently have GPA 909-8A drivers installed on them. I will probably have to go with a larger horn in the future but for now these are the only ones I have. I think your right the 515-8G is probably the best choice.

  6. #6
    Senior Hostboard Member
    A7 woofer


    Old Guy's Avatar
    Join Date
    June 23rd, 2003
    Posts
    6,359
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    62 Post(s)

    Post

    I would recommend the 8G also.

  7. #7
    Senior Hostboard Member
    A7 woofer


    Old Guy's Avatar
    Join Date
    June 23rd, 2003
    Posts
    6,359
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    62 Post(s)

    Post

    Originally posted by CONVERGENCE:
    [QB]
    I have to rectify my power rated comment.
    There all in AES on that chart above. Meaning
    that a 515-8B 75Watt AES is 150 watt RMS same as
    515-8G. .
    QB]
    <font size="2" face="Verdana, Helvetica, sans-serif">Convergence- not sure where you got that, but it is not accurate.

    AES and RMS ratings are similar, just taken under different conditions.

  8. #8
    Senior Hostboard Member LICORNE's Avatar
    Join Date
    April 23rd, 2004
    Posts
    1,603
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    3 Post(s)

    Post

    The difference between the two testing.

    AES is over a long period like 24 hours.

    RMS is over a shorter period 2.5 hours.

    So if your going to run that speaker for a show of 90 minutes . Use RMS to determine the power
    of your amp.

    75W AES=150W RMS
    200W AES=400W RMS
    250W AES=500W RMS

    ......................................

  9. #9
    Senior Hostboard Member LICORNE's Avatar
    Join Date
    April 23rd, 2004
    Posts
    1,603
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    3 Post(s)

    Post

    OOPS . AES IS OVER 2 HOURS TESTING AND RMS DOES NOT TAKE TIME INTO ACCOUNT.

    Sorry about that.

  10. #10
    Inactive Member dgwojo's Avatar
    Join Date
    November 22nd, 2003
    Posts
    172
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I have the new GPA 515-8G's and GPA 515-8LF's, I'll have to compare them soon, both are designed for horn cabinets, both are good choices but my personal preference is to have the 515B reconed with an 8 ohm kit, I like the black spiders better than the beige ones used on the 8G and 8LF, they make the cone too tight IMHO, Dave.

    13

    24

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This forum has been viewed: 28131802 times.